13.06.2026, 12:46
Moin!
Keine Ahnung was du da getestet hast, bei mir gehts immer noch nicht mit PoPT Version 2.125.27. Da ist nicht mal nen Node dazwischen. Das ist nen direkt Connect und trotzdem wird da nix geforwardet.
Forward innitiert von PoPT:
AXIP 11:44:31: GF5BOX to DBO284(3 km) cmd SABM+
AXIP 11:44:31: DBO284(3 km) to GF5BOX rpt UA+
AXIP 11:44:31: DBO284(3 km) to GF5BOX cmd I00-
├─▶ ctl=0x0 pid=0xf0(Text (NO L3)) len=14
┌──┴─▶ Payload▽ (Auto: CP437)
└►[XR-505c-HM$]
AXIP 11:44:32: DBO284(3 km) to GF5BOX cmd I01-
├─▶ ctl=0x2 pid=0xf0(Text (NO L3)) len=145
┌──┴─▶ Payload▽ (Auto: CP437)
├►Welcome to DBO284 BBS
├►You have 0 new messages
├►Please use the 'NH' command to set your 'home' BBS.
└►[0] B,H,I,J,K,KM,L,LM,LN,M,N,R,SB,SP,SR,U,? >
AXIP 11:44:32: GF5BOX to DBO284(3 km) rpt RR2-
AXIP 11:44:32: GF5BOX to DBO284(3 km) cmd DISC+
Auszug aus Log:
2026-06-13 11:44:31,754 - INFO - BBS: bbs_fnc.py.encode_fa_header()> encode_fa_header()> Encoding binary mail: 5073 bytes, Title: Re:, Offset; 0
2026-06-13 11:44:31,779 - INFO - BBS: bbs_fnc.py.encode_fa_header()> encode_fa_header()> Komprimierte: 2916 Bytes
2026-06-13 11:44:31,779 - INFO - BBS: bbs_fnc.py.encode_fa_header()> encode_fa_header()> Dekomprimierte: 5073 Bytes
2026-06-13 11:44:31,779 - INFO - BBS: bbs_fnc.py.encode_fa_header()> encode_fa_header()> Rate: 1.74:1
2026-06-13 11:44:31,779 - INFO - BBS: bbs_fnc.py.encode_fa_header()> encode_fa_header()> Checksum: HEX 0xa8 / INT 168
2026-06-13 11:44:31,779 - INFO - BBS: bbs_fnc.py.encode_fa_header()> encode_fa_header()> Blöcke: 2940
2026-06-13 11:44:31,779 - INFO - BBS: bbs_fnc.py.encode_fa_header()> encode_fa_header()> Gesamtlänge: 2950 Bytes
2026-06-13 11:44:31,779 - INFO - BBS: bbs_main.py._build_new_fwd_Q_task()> BBS-Main: Build FWD-Q> Add Msg to FWD-Q for: DBO284
2026-06-13 11:44:31,779 - INFO - BBS: bbs_main.py._build_new_fwd_Q_task()> BBS-Main: Build FWD-Q> From : DMA284@GF5BOX..#GF.NDS.DEU.EU
2026-06-13 11:44:31,779 - INFO - BBS: bbs_main.py._build_new_fwd_Q_task()> BBS-Main: Build FWD-Q> To : XNET@DEU
2026-06-13 11:44:31,779 - INFO - BBS: bbs_main.py._build_new_fwd_Q_task()> BBS-Main: Build FWD-Q> BID : 000002GF5BOX
2026-06-13 11:44:31,779 - INFO - BBS: bbs_main.py._build_new_fwd_Q_task()> BBS-Main: Build FWD-Q> Typ : B
2026-06-13 11:44:31,779 - INFO - BBS: bbs_main.py._build_new_fwd_Q_task()> BBS-Main: Build FWD-Q> toSend : 2950 Bytes
2026-06-13 11:44:31,780 - INFO - BBS: bbs_main.py._build_new_fwd_Q_task()> BBS-Main: Build FWD-Q> CompRat: 1.72:1
2026-06-13 11:44:31,780 - INFO - BBS: bbs_main.py._build_new_fwd_Q_task()> BBS-Main: Build FWD-Q> BinMode: True
2026-06-13 11:44:31,780 - INFO - BBS: bbs_main.py._build_new_fwd_Q_task()> BBS-Main: Build FWD-Q> Try's : 0
2026-06-13 11:44:31,780 - INFO - BBS: bbs_main.py._build_new_fwd_Q_task()> BBS-Main: Build FWD-Q> LastTry: None
2026-06-13 11:44:31,985 - ERROR - PoPT: prp_handshake_handler.py.get_own_stat_identy()> PRP: Attribute Error: _get_own_stat_identy
2026-06-13 11:44:31,985 - WARNING - PoPT: prp_state_manager.py.set_own()> Lokaler Zugriff auf privaten State 'stat_identy' = None
2026-06-13 11:44:31,985 - DEBUG - PoPT: prp_state_manager.py.set_own()> PRP State updated: stat_identy = None
2026-06-13 11:44:31,985 - INFO - PoPT: prp_transport_layer.py.set_conn_type()> PRP Transport: Verbindungstyp auf ax25_l3 geändert
2026-06-13 11:44:31,985 - DEBUG - PoPT: cliMain.py.__init__()> CLI-NO-CLI: Init
2026-06-13 11:44:31,987 - DEBUG - PoPT: cliMain.py.__init__()> CLI-BOX: Init
2026-06-13 11:44:31,987 - INFO - Logbook: connection_manager.py.new_outgoing_connection()> CH 11 - GF5BOX: - DBO284:GF5BOX - Port: 0
2026-06-13 11:44:31,987 - INFO - Logbook: connection_manager.py.new_outgoing_connection()> CH 11 - GF5BOX: *** Link Setup to DBO284 - (BBS-Marc-Andre) - 3 km > Port 0
2026-06-13 11:44:31,987 - INFO - Logbook: ax25Connection.py.send_sys_Msg_to_gui()> CH 11 - GF5BOX: - DBO284:GF5BOX - Port: 0
2026-06-13 11:44:31,987 - INFO - Logbook: ax25Connection.py.send_sys_Msg_to_gui()> CH 11 - GF5BOX:
*** Link Setup to DBO284 - (BBS-Marc-Andre) - 3 km > Port 0
2026-06-13 11:44:31,988 - DEBUG - PoPT: cliMain.py.__init__()> CLI-NO-CLI: Init
2026-06-13 11:44:31,988 - DEBUG - PoPT: AutoConnTask.py.__init__()> ConnTask connection: Start
2026-06-13 11:44:31,988 - DEBUG - PoPT: AutoConnTask.py._set_state_exec()> AutoConn State change: 1 > 2
2026-06-13 11:44:31,988 - INFO - BBS: bbs_fwd_connection.py.__init__()> BBS-Conn (DBO284): New FWD Connection> DBO284 - TX: True
2026-06-13 11:44:31,988 - DEBUG - PoPT: AutoConnTask.py._set_state_exec()> AutoConn State change: 2 > 4
2026-06-13 11:44:31,988 - INFO - BBS: bbs_main.py._exec_fwdQ_task()> BBS-Main: Exec FWD-Q> Next Fwd to: DBO284
2026-06-13 11:44:31,988 - INFO - BBS: bbs_main.py._exec_fwdQ_task()> BBS-Main: Exec FWD-Q> Port : 0
2026-06-13 11:44:31,988 - INFO - BBS: bbs_main.py._exec_fwdQ_task()> BBS-Main: Exec FWD-Q> via : ([],)
2026-06-13 11:44:31,988 - INFO - BBS: bbs_main.py._exec_fwdQ_task()> BBS-Main: Exec FWD-Q> AXIP-Addr: (('192.168.234.29', 9394),)
2026-06-13 11:44:31,998 - INFO - Logbook: connection_manager.py.accept_new_connection()> CH 11 - GF5BOX: - DBO284:GF5BOX - Port: 0
2026-06-13 11:44:31,998 - INFO - Logbook: connection_manager.py.accept_new_connection()> CH 11 - GF5BOX: *** Connected fm DBO284
2026-06-13 11:44:31,998 - INFO - Logbook: ax25Connection.py.send_sys_Msg_to_gui()> CH 11 - GF5BOX: - DBO284:GF5BOX - Port: 0
2026-06-13 11:44:31,998 - INFO - Logbook: ax25Connection.py.send_sys_Msg_to_gui()> CH 11 - GF5BOX: *** Connected fm DBO284
2026-06-13 11:44:31,999 - DEBUG - PoPT: bbs_fwd_connection.py.connection_rx()> fwd-conn-RX(DBO284): State: 20
2026-06-13 11:44:31,999 - DEBUG - PoPT: bbs_fwd_connection.py.connection_rx()> fwd-conn-RX(DBO284): raw_data: bytearray(b'[XR-505c-HM$]\r')
2026-06-13 11:44:31,999 - INFO - BBS: bbs_fwd_connection.py._check_feature_flags()> BBS-Conn (DBO284): Features> ['$', 'H', 'M']
2026-06-13 11:44:32,000 - INFO - BBS: bbs_fwd_connection.py._check_feature_flags()> BBS-Conn (DBO284): Bin Mode> False
2026-06-13 11:44:32,000 - INFO - BBS: bbs_fwd_connection.py._wait_sw_id()> BBS-Conn (DBO284): SW-ID found> DBO284: ['$', 'H', 'M']
2026-06-13 11:44:32,001 - DEBUG - PoPT: bbs_fwd_connection.py.connection_rx()> fwd-conn-RX(DBO284): State: 1
2026-06-13 11:44:32,001 - DEBUG - PoPT: bbs_fwd_connection.py.connection_rx()> fwd-conn-RX(DBO284): raw_data: bytearray(b"Welcome to DBO284 BBS\rYou have 0 new messages\rPlease use the \'NH\' command to set your \'home\' BBS.\r\r[0] B,H,I,J,K,KM,L,LM,LN,M,N,R,SB,SP,SR,U,? >\r")
2026-06-13 11:44:32,002 - ERROR - PoPT: bbs_fwd_connection.py._send_fwd_init_cmd()> Feat-Flag no mode F (F6FBB Batch forwarding protocol): ['$', 'H', 'M']
2026-06-13 11:44:32,003 - INFO - BBS: bbs_fwd_connection.py.end_conn()> BBS-Conn (DBO284): End-Conn > try to remove bbsConn > DBO284 - State: 21
2026-06-13 11:44:32,494 - DEBUG - PoPT: AutoConnTask.py._set_state_exec()> AutoConn State change: 4 > 0
2026-06-13 11:44:32,494 - DEBUG - PoPT: popt_sched_tasker.py._AutoConn_tasker()> _AutoConn_tasker del: DBO284
2026-06-13 11:44:32,529 - DEBUG - PoPT: ax25Connection.py.end_connection()> end_connection: DBO284:GF5BOX
2026-06-13 11:44:32,530 - INFO - Logbook: connection_manager.py.end_connection()> CH 11 - GF5BOX: - DBO284:GF5BOX - Port: 0
2026-06-13 11:44:32,530 - INFO - Logbook: connection_manager.py.end_connection()> CH 11 - GF5BOX: *** Disconnected fm DBO284
Die beiden fett gemachten Log Zeilen sind in meinen Augen das eigentliche Problem. Es will FBB Batch Forward machen, was aber Xrouter nicht unter stützt, und bricht dann den Connect ab. Ich bleibe bei meiner Meinung. PoPT kann kein W0RLI Forward und deswegen klappt das nicht.
Hier im Gegenzug ne OpenBCM connectet auch direkt die Xrouter Box:
*** 13:26:30 port 1 rcvd:
AX25: A05BBS-8>DBO284 <C C P>
*** 13:26:30 port 1 sent:
AX25: DBO284>A05BBS-8 <UA R F>
*** 13:26:30 port 1 sent:
AX25: DBO284>A05BBS-8 <I C R0 S0> ilen=14 pid=240 DATA:
[XR-505c-HM$]
*** 13:26:30 port 1 sent:
AX25: DBO284>A05BBS-8 <I C R0 S1> ilen=93 pid=240 DATA:
Welcome to DBO284 BBS
You have 0 new messages
[0] B,H,I,J,K,KM,L,LM,LN,M,N,R,SB,SP,SR,U,? >
*** 13:26:30 port 1 rcvd:
AX25: A05BBS-8>DBO284 <RR R R2>
*** 13:26:30 port 1 rcvd:
AX25: A05BBS-8>DBO284 <I C R2 S0> ilen=20 pid=240 DATA:
[OpenBCM-2.0.3-HM$]
*** 13:26:30 port 1 sent:
AX25: DBO284>A05BBS-8 <I C R1 S2> ilen=2 pid=240 DATA:
>
*** 13:26:30 port 1 rcvd:
AX25: A05BBS-8>DBO284 <RR R R3>
*** 13:26:30 port 1 rcvd:
AX25: A05BBS-8>DBO284 <I C R3 S1> ilen=57 pid=240 DATA:
SP DMA284 @ DBO284.#GF.NDS.DEU.EU < GF1MAA $D60A05BBS00M
*** 13:26:30 port 1 sent:
AX25: DBO284>A05BBS-8 <I C R2 S3> ilen=3 pid=240 DATA:
OK
*** 13:26:30 port 1 rcvd:
AX25: A05BBS-8>DBO284 <RR R R4>
*** 13:26:30 port 1 rcvd:
AX25: A05BBS-8>DBO284 <I C R4 S2> ilen=186 pid=240 DATA:
Test
R:260613/1119z @:A05BBS.#GF.NDS.DEU.EU [OBCM Wittingen JO52IR] obcm2.0.1
From: GF1MAA @ A05BBS.#GF.NDS.DEU.EU
To: DMA284 @ DBO284.#GF.NDS.DEU.EU
X-Info: No login password
Test
*** 13:26:30 port 1 sent:
AX25: DBO284>A05BBS-8 <I C R3 S4> ilen=2 pid=240 DATA:
>
*** 13:26:30 port 1 rcvd:
AX25: A05BBS-8>DBO284 <RR R R5>
*** 13:26:31 port 1 rcvd:
AX25: A05BBS-8>DBO284 <I C R5 S3> ilen=57 pid=240 DATA:
SP DMA284 @ DBO284.#GF.NDS.DEU.EU < GF1MAA $D60A05BBS00N
*** 13:26:31 port 1 sent:
AX25: DBO284>A05BBS-8 <I C R4 S5> ilen=3 pid=240 DATA:
OK
*** 13:26:31 port 1 rcvd:
AX25: A05BBS-8>DBO284 <RR R R6>
*** 13:26:31 port 1 rcvd:
AX25: A05BBS-8>DBO284 <I C R6 S4> ilen=188 pid=240 DATA:
Test 2
R:260613/1126z @:A05BBS.#GF.NDS.DEU.EU [OBCM Wittingen JO52IR] obcm2.0.3
From: GF1MAA @ A05BBS.#GF.NDS.DEU.EU
To: DMA284 @ DBO284.#GF.NDS.DEU.EU
X-Info: No login password
Test
*** 13:26:31 port 1 sent:
AX25: DBO284>A05BBS-8 <I C R5 S6> ilen=2 pid=240 DATA:
>
*** 13:26:31 port 1 rcvd:
AX25: A05BBS-8>DBO284 <RR R R7>
*** 13:26:31 port 1 rcvd:
AX25: A05BBS-8>DBO284 <I C R7 S5> ilen=3 pid=240 DATA:
F>
*** 13:26:31 port 1 sent:
AX25: DBO284>A05BBS-8 <D C P>
Log OpenBCM:
13.06.26 13:26:30l DBO284: #R fwdsend: DBO284 (A05BBS-8 > DBO284)
13.06.26 13:26:31l DBO284: #R makeconn: ok DBO284
13.06.26 13:26:31l DBO284: #R DBO284: >SP DMA284 @ DBO284.#GF.NDS.DEU.EU < GF1MAA $D60A05BBS00M
13.06.26 13:26:31l DBO284: #R DBO284: >SP DMA284 @ DBO284.#GF.NDS.DEU.EU < GF1MAA $D60A05BBS00N
13.06.26 13:26:33l DBO284: #R mblogout: DBO284 (disc)
OpenBCM stört sich auch nicht an irgendwelchen C-Texten. Desweiteren ist *** Connected bzw. *** connected kein Standard. BPQ macht das nicht und Xrouter halt auch nicht. Und diese beiden Programme sind weltweit weiter verbreitet als TNN, XNet und was sonst noch so an PR Prgrammen in deutschen Landen rum fleucht und kreucht.
55 & 73 Marc-Andre
Keine Ahnung was du da getestet hast, bei mir gehts immer noch nicht mit PoPT Version 2.125.27. Da ist nicht mal nen Node dazwischen. Das ist nen direkt Connect und trotzdem wird da nix geforwardet.
Forward innitiert von PoPT:
AXIP 11:44:31: GF5BOX to DBO284(3 km) cmd SABM+
AXIP 11:44:31: DBO284(3 km) to GF5BOX rpt UA+
AXIP 11:44:31: DBO284(3 km) to GF5BOX cmd I00-
├─▶ ctl=0x0 pid=0xf0(Text (NO L3)) len=14
┌──┴─▶ Payload▽ (Auto: CP437)
└►[XR-505c-HM$]
AXIP 11:44:32: DBO284(3 km) to GF5BOX cmd I01-
├─▶ ctl=0x2 pid=0xf0(Text (NO L3)) len=145
┌──┴─▶ Payload▽ (Auto: CP437)
├►Welcome to DBO284 BBS
├►You have 0 new messages
├►Please use the 'NH' command to set your 'home' BBS.
└►[0] B,H,I,J,K,KM,L,LM,LN,M,N,R,SB,SP,SR,U,? >
AXIP 11:44:32: GF5BOX to DBO284(3 km) rpt RR2-
AXIP 11:44:32: GF5BOX to DBO284(3 km) cmd DISC+
Auszug aus Log:
2026-06-13 11:44:31,754 - INFO - BBS: bbs_fnc.py.encode_fa_header()> encode_fa_header()> Encoding binary mail: 5073 bytes, Title: Re:, Offset; 0
2026-06-13 11:44:31,779 - INFO - BBS: bbs_fnc.py.encode_fa_header()> encode_fa_header()> Komprimierte: 2916 Bytes
2026-06-13 11:44:31,779 - INFO - BBS: bbs_fnc.py.encode_fa_header()> encode_fa_header()> Dekomprimierte: 5073 Bytes
2026-06-13 11:44:31,779 - INFO - BBS: bbs_fnc.py.encode_fa_header()> encode_fa_header()> Rate: 1.74:1
2026-06-13 11:44:31,779 - INFO - BBS: bbs_fnc.py.encode_fa_header()> encode_fa_header()> Checksum: HEX 0xa8 / INT 168
2026-06-13 11:44:31,779 - INFO - BBS: bbs_fnc.py.encode_fa_header()> encode_fa_header()> Blöcke: 2940
2026-06-13 11:44:31,779 - INFO - BBS: bbs_fnc.py.encode_fa_header()> encode_fa_header()> Gesamtlänge: 2950 Bytes
2026-06-13 11:44:31,779 - INFO - BBS: bbs_main.py._build_new_fwd_Q_task()> BBS-Main: Build FWD-Q> Add Msg to FWD-Q for: DBO284
2026-06-13 11:44:31,779 - INFO - BBS: bbs_main.py._build_new_fwd_Q_task()> BBS-Main: Build FWD-Q> From : DMA284@GF5BOX..#GF.NDS.DEU.EU
2026-06-13 11:44:31,779 - INFO - BBS: bbs_main.py._build_new_fwd_Q_task()> BBS-Main: Build FWD-Q> To : XNET@DEU
2026-06-13 11:44:31,779 - INFO - BBS: bbs_main.py._build_new_fwd_Q_task()> BBS-Main: Build FWD-Q> BID : 000002GF5BOX
2026-06-13 11:44:31,779 - INFO - BBS: bbs_main.py._build_new_fwd_Q_task()> BBS-Main: Build FWD-Q> Typ : B
2026-06-13 11:44:31,779 - INFO - BBS: bbs_main.py._build_new_fwd_Q_task()> BBS-Main: Build FWD-Q> toSend : 2950 Bytes
2026-06-13 11:44:31,780 - INFO - BBS: bbs_main.py._build_new_fwd_Q_task()> BBS-Main: Build FWD-Q> CompRat: 1.72:1
2026-06-13 11:44:31,780 - INFO - BBS: bbs_main.py._build_new_fwd_Q_task()> BBS-Main: Build FWD-Q> BinMode: True
2026-06-13 11:44:31,780 - INFO - BBS: bbs_main.py._build_new_fwd_Q_task()> BBS-Main: Build FWD-Q> Try's : 0
2026-06-13 11:44:31,780 - INFO - BBS: bbs_main.py._build_new_fwd_Q_task()> BBS-Main: Build FWD-Q> LastTry: None
2026-06-13 11:44:31,985 - ERROR - PoPT: prp_handshake_handler.py.get_own_stat_identy()> PRP: Attribute Error: _get_own_stat_identy
2026-06-13 11:44:31,985 - WARNING - PoPT: prp_state_manager.py.set_own()> Lokaler Zugriff auf privaten State 'stat_identy' = None
2026-06-13 11:44:31,985 - DEBUG - PoPT: prp_state_manager.py.set_own()> PRP State updated: stat_identy = None
2026-06-13 11:44:31,985 - INFO - PoPT: prp_transport_layer.py.set_conn_type()> PRP Transport: Verbindungstyp auf ax25_l3 geändert
2026-06-13 11:44:31,985 - DEBUG - PoPT: cliMain.py.__init__()> CLI-NO-CLI: Init
2026-06-13 11:44:31,987 - DEBUG - PoPT: cliMain.py.__init__()> CLI-BOX: Init
2026-06-13 11:44:31,987 - INFO - Logbook: connection_manager.py.new_outgoing_connection()> CH 11 - GF5BOX: - DBO284:GF5BOX - Port: 0
2026-06-13 11:44:31,987 - INFO - Logbook: connection_manager.py.new_outgoing_connection()> CH 11 - GF5BOX: *** Link Setup to DBO284 - (BBS-Marc-Andre) - 3 km > Port 0
2026-06-13 11:44:31,987 - INFO - Logbook: ax25Connection.py.send_sys_Msg_to_gui()> CH 11 - GF5BOX: - DBO284:GF5BOX - Port: 0
2026-06-13 11:44:31,987 - INFO - Logbook: ax25Connection.py.send_sys_Msg_to_gui()> CH 11 - GF5BOX:
*** Link Setup to DBO284 - (BBS-Marc-Andre) - 3 km > Port 0
2026-06-13 11:44:31,988 - DEBUG - PoPT: cliMain.py.__init__()> CLI-NO-CLI: Init
2026-06-13 11:44:31,988 - DEBUG - PoPT: AutoConnTask.py.__init__()> ConnTask connection: Start
2026-06-13 11:44:31,988 - DEBUG - PoPT: AutoConnTask.py._set_state_exec()> AutoConn State change: 1 > 2
2026-06-13 11:44:31,988 - INFO - BBS: bbs_fwd_connection.py.__init__()> BBS-Conn (DBO284): New FWD Connection> DBO284 - TX: True
2026-06-13 11:44:31,988 - DEBUG - PoPT: AutoConnTask.py._set_state_exec()> AutoConn State change: 2 > 4
2026-06-13 11:44:31,988 - INFO - BBS: bbs_main.py._exec_fwdQ_task()> BBS-Main: Exec FWD-Q> Next Fwd to: DBO284
2026-06-13 11:44:31,988 - INFO - BBS: bbs_main.py._exec_fwdQ_task()> BBS-Main: Exec FWD-Q> Port : 0
2026-06-13 11:44:31,988 - INFO - BBS: bbs_main.py._exec_fwdQ_task()> BBS-Main: Exec FWD-Q> via : ([],)
2026-06-13 11:44:31,988 - INFO - BBS: bbs_main.py._exec_fwdQ_task()> BBS-Main: Exec FWD-Q> AXIP-Addr: (('192.168.234.29', 9394),)
2026-06-13 11:44:31,998 - INFO - Logbook: connection_manager.py.accept_new_connection()> CH 11 - GF5BOX: - DBO284:GF5BOX - Port: 0
2026-06-13 11:44:31,998 - INFO - Logbook: connection_manager.py.accept_new_connection()> CH 11 - GF5BOX: *** Connected fm DBO284
2026-06-13 11:44:31,998 - INFO - Logbook: ax25Connection.py.send_sys_Msg_to_gui()> CH 11 - GF5BOX: - DBO284:GF5BOX - Port: 0
2026-06-13 11:44:31,998 - INFO - Logbook: ax25Connection.py.send_sys_Msg_to_gui()> CH 11 - GF5BOX: *** Connected fm DBO284
2026-06-13 11:44:31,999 - DEBUG - PoPT: bbs_fwd_connection.py.connection_rx()> fwd-conn-RX(DBO284): State: 20
2026-06-13 11:44:31,999 - DEBUG - PoPT: bbs_fwd_connection.py.connection_rx()> fwd-conn-RX(DBO284): raw_data: bytearray(b'[XR-505c-HM$]\r')
2026-06-13 11:44:31,999 - INFO - BBS: bbs_fwd_connection.py._check_feature_flags()> BBS-Conn (DBO284): Features> ['$', 'H', 'M']
2026-06-13 11:44:32,000 - INFO - BBS: bbs_fwd_connection.py._check_feature_flags()> BBS-Conn (DBO284): Bin Mode> False
2026-06-13 11:44:32,000 - INFO - BBS: bbs_fwd_connection.py._wait_sw_id()> BBS-Conn (DBO284): SW-ID found> DBO284: ['$', 'H', 'M']
2026-06-13 11:44:32,001 - DEBUG - PoPT: bbs_fwd_connection.py.connection_rx()> fwd-conn-RX(DBO284): State: 1
2026-06-13 11:44:32,001 - DEBUG - PoPT: bbs_fwd_connection.py.connection_rx()> fwd-conn-RX(DBO284): raw_data: bytearray(b"Welcome to DBO284 BBS\rYou have 0 new messages\rPlease use the \'NH\' command to set your \'home\' BBS.\r\r[0] B,H,I,J,K,KM,L,LM,LN,M,N,R,SB,SP,SR,U,? >\r")
2026-06-13 11:44:32,002 - ERROR - PoPT: bbs_fwd_connection.py._send_fwd_init_cmd()> Feat-Flag no mode F (F6FBB Batch forwarding protocol): ['$', 'H', 'M']
2026-06-13 11:44:32,003 - INFO - BBS: bbs_fwd_connection.py.end_conn()> BBS-Conn (DBO284): End-Conn > try to remove bbsConn > DBO284 - State: 21
2026-06-13 11:44:32,494 - DEBUG - PoPT: AutoConnTask.py._set_state_exec()> AutoConn State change: 4 > 0
2026-06-13 11:44:32,494 - DEBUG - PoPT: popt_sched_tasker.py._AutoConn_tasker()> _AutoConn_tasker del: DBO284
2026-06-13 11:44:32,529 - DEBUG - PoPT: ax25Connection.py.end_connection()> end_connection: DBO284:GF5BOX
2026-06-13 11:44:32,530 - INFO - Logbook: connection_manager.py.end_connection()> CH 11 - GF5BOX: - DBO284:GF5BOX - Port: 0
2026-06-13 11:44:32,530 - INFO - Logbook: connection_manager.py.end_connection()> CH 11 - GF5BOX: *** Disconnected fm DBO284
Die beiden fett gemachten Log Zeilen sind in meinen Augen das eigentliche Problem. Es will FBB Batch Forward machen, was aber Xrouter nicht unter stützt, und bricht dann den Connect ab. Ich bleibe bei meiner Meinung. PoPT kann kein W0RLI Forward und deswegen klappt das nicht.
Hier im Gegenzug ne OpenBCM connectet auch direkt die Xrouter Box:
*** 13:26:30 port 1 rcvd:
AX25: A05BBS-8>DBO284 <C C P>
*** 13:26:30 port 1 sent:
AX25: DBO284>A05BBS-8 <UA R F>
*** 13:26:30 port 1 sent:
AX25: DBO284>A05BBS-8 <I C R0 S0> ilen=14 pid=240 DATA:
[XR-505c-HM$]
*** 13:26:30 port 1 sent:
AX25: DBO284>A05BBS-8 <I C R0 S1> ilen=93 pid=240 DATA:
Welcome to DBO284 BBS
You have 0 new messages
[0] B,H,I,J,K,KM,L,LM,LN,M,N,R,SB,SP,SR,U,? >
*** 13:26:30 port 1 rcvd:
AX25: A05BBS-8>DBO284 <RR R R2>
*** 13:26:30 port 1 rcvd:
AX25: A05BBS-8>DBO284 <I C R2 S0> ilen=20 pid=240 DATA:
[OpenBCM-2.0.3-HM$]
*** 13:26:30 port 1 sent:
AX25: DBO284>A05BBS-8 <I C R1 S2> ilen=2 pid=240 DATA:
>
*** 13:26:30 port 1 rcvd:
AX25: A05BBS-8>DBO284 <RR R R3>
*** 13:26:30 port 1 rcvd:
AX25: A05BBS-8>DBO284 <I C R3 S1> ilen=57 pid=240 DATA:
SP DMA284 @ DBO284.#GF.NDS.DEU.EU < GF1MAA $D60A05BBS00M
*** 13:26:30 port 1 sent:
AX25: DBO284>A05BBS-8 <I C R2 S3> ilen=3 pid=240 DATA:
OK
*** 13:26:30 port 1 rcvd:
AX25: A05BBS-8>DBO284 <RR R R4>
*** 13:26:30 port 1 rcvd:
AX25: A05BBS-8>DBO284 <I C R4 S2> ilen=186 pid=240 DATA:
Test
R:260613/1119z @:A05BBS.#GF.NDS.DEU.EU [OBCM Wittingen JO52IR] obcm2.0.1
From: GF1MAA @ A05BBS.#GF.NDS.DEU.EU
To: DMA284 @ DBO284.#GF.NDS.DEU.EU
X-Info: No login password
Test
*** 13:26:30 port 1 sent:
AX25: DBO284>A05BBS-8 <I C R3 S4> ilen=2 pid=240 DATA:
>
*** 13:26:30 port 1 rcvd:
AX25: A05BBS-8>DBO284 <RR R R5>
*** 13:26:31 port 1 rcvd:
AX25: A05BBS-8>DBO284 <I C R5 S3> ilen=57 pid=240 DATA:
SP DMA284 @ DBO284.#GF.NDS.DEU.EU < GF1MAA $D60A05BBS00N
*** 13:26:31 port 1 sent:
AX25: DBO284>A05BBS-8 <I C R4 S5> ilen=3 pid=240 DATA:
OK
*** 13:26:31 port 1 rcvd:
AX25: A05BBS-8>DBO284 <RR R R6>
*** 13:26:31 port 1 rcvd:
AX25: A05BBS-8>DBO284 <I C R6 S4> ilen=188 pid=240 DATA:
Test 2
R:260613/1126z @:A05BBS.#GF.NDS.DEU.EU [OBCM Wittingen JO52IR] obcm2.0.3
From: GF1MAA @ A05BBS.#GF.NDS.DEU.EU
To: DMA284 @ DBO284.#GF.NDS.DEU.EU
X-Info: No login password
Test
*** 13:26:31 port 1 sent:
AX25: DBO284>A05BBS-8 <I C R5 S6> ilen=2 pid=240 DATA:
>
*** 13:26:31 port 1 rcvd:
AX25: A05BBS-8>DBO284 <RR R R7>
*** 13:26:31 port 1 rcvd:
AX25: A05BBS-8>DBO284 <I C R7 S5> ilen=3 pid=240 DATA:
F>
*** 13:26:31 port 1 sent:
AX25: DBO284>A05BBS-8 <D C P>
Log OpenBCM:
13.06.26 13:26:30l DBO284: #R fwdsend: DBO284 (A05BBS-8 > DBO284)
13.06.26 13:26:31l DBO284: #R makeconn: ok DBO284
13.06.26 13:26:31l DBO284: #R DBO284: >SP DMA284 @ DBO284.#GF.NDS.DEU.EU < GF1MAA $D60A05BBS00M
13.06.26 13:26:31l DBO284: #R DBO284: >SP DMA284 @ DBO284.#GF.NDS.DEU.EU < GF1MAA $D60A05BBS00N
13.06.26 13:26:33l DBO284: #R mblogout: DBO284 (disc)
OpenBCM stört sich auch nicht an irgendwelchen C-Texten. Desweiteren ist *** Connected bzw. *** connected kein Standard. BPQ macht das nicht und Xrouter halt auch nicht. Und diese beiden Programme sind weltweit weiter verbreitet als TNN, XNet und was sonst noch so an PR Prgrammen in deutschen Landen rum fleucht und kreucht.
55 & 73 Marc-Andre